HMI is a method for controlling 3-speed fans that ensures lower investment costs and easier installation. It also offers greater aesthetics, as instead of two components: a controller and a speed regulator, only one HMI controller is required. Enhanced functionality allows for adjusting operating parameters to individual needs, and the combination of automatic regulation with a weekly programmer creates an autonomous control system. Additionally, the controller enables remote communication via WI-FI.
- the HMI controller is compatible with LEO heaters with a 3-speed fan and with ELIS air curtains.
- automatic or manual 3-step fan speed regulation,
- temperature control in the room (due to opening/closing of the valve or automatic setting of fan speed),
- possibility to control max. 18 units via single HMI controller (use of 3 RX splitters is essential),
- fan operation in continuous or thermostatic mode,
- operating modes: heating, cooling, ventilation,
- antifreeze - protection against too low temperature in the room,
- possibility to connect external temperature sensor NTC,
- possibility of connection to BMS,
- possibility of connecting an external start/stop signal, e.g., a door sensor,
- possibility of Wi-Fi communication via the TUYA app.
| HMI WI-FI AC | |
|---|---|
| Power supply | HMI230VAC/50Hz |
| Power supply | panel with buttons/LCD display |
| Temperature adjustment range | +5 ÷ +40°C |
| Number of steps | 3 steps |
| Operating temperature range | –10 ÷ +60°C |
| Storage temperature range | 0 ÷ +50°C |
| Temperature sensor | built-in / external NTC (option) |
| IP | 20 |
| Installation | on the wall |
| Casing | ABS & Acrylic |
| Weekly programmer | Yes: 5 days + 2 days, OFF |
| Rated power load | 830 W (single phase motor) |
